Rev.010521DT (DS0189)
5
Spring Attachment Method
First hook one end of the spring in the
frame slot, then hold the screen around the
frame to pull, and finally use the spring
hook to pull the spring hook in the screen
hole.
1.
Connect
Edge Trims A&B to
form the top/bottom trims with
the
⑧
Short Center joints
,
and then insert them on the
top/bottom frames.
2. Connect the
side edge trims
C
with the top/bottom edge
trim with
⑮
Elbow Joints C
.
3. Adjust the trim so that the top
and bottom trim pieces are touching and show no gaps
on the corners. Then fasten them with the
⑨
M4 x 4 screws.
4. Attach a
spring b
on the middle of each edge trim (1-6) to the frame
as shown in the illustration.
5.Insall the
⑯
corner covers
on the four corners of the edge trim.
3. Begin by simultaneously attaching three springs
in the center of the side frames (C→D) and repeat
for top/bottom frames (A→B).
4. Then, simultaneously attach the springs from the
center to all corners. (Leaving only the four corners.
5. Finally, attach the springs at the four corners
(E→F→G→H).
Backside of screen
Center
connection
⑧
Short Center
Joints
⑮
Elbow Joints C
Corner
connection
1
2
5
6
4
3
Edge Trim
Spring b
21
⑯ Corner cover
Front side
Note: Lock front side first
then back side
Back side
Installation of Corner Cover
21
4
.
Bezel Trim Frame Assembly/Installation
