Rev.060116-D
8
4.
Insert the
threaded rods
(C) through the
M8 expanding bolts
and then attach the
M8x40mm
hexagonal screws
with the
washer
(E). Last put the
Hanging Bracket
(B) through the threaded rod
equal to the height of the screen’s housing. Once they are firmly in place (as shown below) make sure
that they will hold the weight of the screen.
5.
Push the screen up into the space. Use the
threaded rods
(C) to attach the screen assembly to the
ceiling. The
hexagonal screws
(E) will connect the screen to the rest of the assembly. Once firmly in
place; use the
nuts
(F) to ensure a firm connection. Use the
socket wrench
(D) to make sure that the
bolts are firmly tightened.
6.
Install
end flange cover panel
(A) between the gap and the screen to complete the installation.
For local Elite Screens contact or Technical Support, please visit
Ceiling
Socket wrench (H)
Ceiling
E and F
C
B
C
Push
Push the screen to
the hole of the
ceiling
，
the
screw across the
hole of the end
cap.
Use the Socket wrench
to attach the washer
and the outside
hexscrews, and then
adjust the bottom of
the screen to make it
parallel with the
ceiling, and then fasten
the screw.
