4 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
ATTACH/DETACH HANDLE
CAUTION:
Ensure the Temperature Dial is set to “OFF,” the Power Cord is unplugged
from the electrical outlet, and the product has thoroughly cooled before attaching
or detaching the Handle.
TO ATTACH:
1. Align the electrical pins of the Base
with the electrical pinholes of the
Handle.
Ensure the Locking Lever
is in the raised/vertical position.
2. Slide the Handle until it locks into
position on the Base.
3. Push down the Locking Lever so it
securely locks into the tab recess.
4. The handle should be secure and
not fall off. If the handle is loose,
then the locking lever was not
properly engaged. Return to step-1
and repeats steps 1-3.
TO DETACH:
1. Slightly push the Locking Lever tab
away from the tab recess.
2. Push the Locking Lever to its raised/
vertical position.
3. Remove the Handle from the Base.
NOTE:
Do not twist or bend the
Handle when removing it from
the Base, as product damage may
result.
4. Push down the Locking Lever so it
securely locks into the tab recess,
for proper storage.
Summary of Contents for EFS-400
Page 2: ......
