Rev.042417 DR
4
www.eliteproav.com
A.
B.
Suspended Ceiling Installation (300” diagonal models)
1.
Select the installation location for your screen. Measure the distances between each eyebolt (Shown as
measurements L and A in Fig.1). Mark the installation area on the ceiling based on the measurements
taken. Using the marks as a guideline, drill a pilot hole in the ceiling for each suspension bolt (A).
2.
Screw an eyebolt into the ceiling at the marked areas for all suspension eyebolts located on the top of
the screen (A/B/C/D). Attach the included snap link to each suspension eyebolt and connect it to a chain
of the preffered length. Connect the chain to the eyebolt in the ceiling.
TensionPro Series | Controls and Accessories
A. IR Remote
B. RF Remote
C. IRextended "eye" receiver
D. 5-12 volt trigger cable
（
Fig.1
）
Wall
（
Fig.2
）
D.
L
A
A
L
Ceiling
C.