03282019JA
5
U
-00140
II. Suspended
1. Screw the
eyebolt
(G)
on the
bracket connector
(D)
.
2. Attach the
snap link
(H)
through the
eyebolt (G)
and connect it to an eyebolt screw
(not included) rated for the screen’s weight.
Screen material tension adjustment
(4mm Allen Wrench required and not included)
Remove the weight bar end cap to expose the adjustment
tension knob. Insert your 4mm Allen Wrench to push in
the adjustment tension knob, turn clockwise and your
screen will gain more tension. Turn the Allen Wrench
counter clockwise and the screen will lose tension. Please
note this adjustment is not necessary as the tension of the
screen has been set to its factory setting for best
performance. Please contact EPV® for assistance to
avoid damaging the screen and voiding your warranty.
Saker Tab-Tension CineGrey 5D® Series | Controls and Accessories
A. IR
Remote
B. RF
Remote
C. Wall
switch
control box
D. 5-12 volt
trigger
cable
E. IR
extended
“eye” receiver
F. Wireless 5-
12v trigger
cable
G. AAA
batteries
H. Bubble
Leveler
Screen operation
Electric Current
: Depending upon region, your screen will operate on 100v, 110v, or 220v voltage.
1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet.
2. Once the screen has power, you’ll be able to control it using any of the 6 methods described below.
6 ways to control your Saker Tab-Tension
1.
IR remote control
(
Item A, Fig 1
): The Infrared functions by direct line of
sight contact with a beam range of 30 feet. Aim the IR remote at the circular
window located on the left side of the screen.
2. IR “Eye” Receiver
(
Item E, Fig 2
): The IR “Eye” Receiver plugs directly
into the screen’s RJ-45 input to present a low profile line-of-sight control option
for your IR remote control even in a recessed ceiling installation.
3. RF Remote Control
(
Item B
): The radio waves eliminate the need for a direct
line of sight with a range of 100 feet.