11152019-JA
7
Step 13
: Install the
angle cover (j)
on each corner of the frame and install the LED light strip to hold down the
angle cover (or just use the clips if LED kit will not be installed). Then insert the
LED light clip (l)
to hold the
LED light strip in place.
Wall Installation
Step 14:
Measure the overall length and height of the frame and drill holes for the top brackets. Line up the wall
brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver. If not
installing into a structural wood stud, use a hollow wall anchor then screw in the M5x50 wood screws with a
screwdriver. Make sure the brackets are leveled.
1
1
2
2
2
2