11152019-JA
3
Frame Assembly
Step 1
: Place the soft padded
EPE sponge on clean area on the
ground where the screen will be
assembled.
Step 2:
Position the pieces of the
frame on the EPE sponge in the
arrangement shown below
Step 3
: Remove the foam in all frame ends before assembling the frame
Note: Springs are pre-inserted into the grooves of the frame. Please make sure to
avoid the springs from slipping out of the grooves when you remove the foam.
Step 4:
Insert the
center joint (a)
connectors into
one-half of the horizontal frame (b/c)
and secure with the
M4x6 screws (c)
.
Step 5:
Connect the
elbow joints (b)
to the top and bottom sections of the vertical frame. Once inserted, connect
the vertical sections of the horizontal frame sections. Make sure all holes are in alignment and the frame pieces
are flush (no gaps). They should form perfect right angles.
Step 6
: Secure the elbow joints by fastening them with
M4x6 screws (c)
, 4 at each corner.
2. Hardware Parts List
a.
b.
c.
d.
e.
f.
g.
h.
i
j.
k.
l.
m.
Remove the foam
