Elite Greenhouses 6'3" WIDE HIGH EAVE, Instructions & Illustrations

Page: 6 / 32

INSTALLATION INSTRUCTIONS FOR THE 6’3” WIDE MODEL
“HIGH EAVE” RANGE”
THE CONTENTS OF THIS CARTON ARE DIVIDED INTO DIFFERENT FRAME AS-
SEMBLIES THAT COLLECTIVELY MAKE UP THE COMPLETED GREENHOUSE
FRAMEWORK.
It is recommended that each framework assembly is fully completed before moving onto the next.
The contents are as follows:
1. Two side frames
2. Rear end frame
3. Door end frame
4. Roof vent (two for 10’6” & 12’6” models)
5. Door
6. Bag of fittings containing:
A. Nuts and bolts general assembly
B. Overlap clips for glass
C. Spring clips for glass
D. Casement stay (1 for 4’5”, 6’5” & 8’5” models) (2 for 10’5” & 12’5” models)
E. Casement stay nuts and bolts
F. Four eave plates
G. Two ridge plates
H. Two door wheels
I. One door skid (this may already be fitted to door panel)
J. Small self tapping screws
K. 1 Door lock and fitting
7. Roof bars
8. Glazing beading
9. One length of ridge
10. Two black draught excluders
11. Small angle brackets for anchoring down
12. 2 Rectangular plates with 3 slots (for door end assembly)
For clear identification of parts and the number required please carefully refer to he earli-
er pages of component drawings and parts list.