Elite Greenhouses 6'3" WIDE HIGH EAVE, Instructions & Illustrations

Page: 24 / 32

FITTING THE RAMP
The final aluminium piece of the greenhouse is the door end ramp cill. The ramp is at-
tached to the door end cill by engaging the nub of the door end cill to the ‘C’ groove of
the ramp. The ramp is now rotated to horizontal. Drill a hole at each end approx 20mm
in from the end of the ramp and into the floor. Plug and screw.
If you are fitting onto soft ground, you must ensure that a solid material is underneath
the ramp to avoid damage when you step on the ramp to enter the greenhouse. You can
lay a row of bricks sunk to ground level, a concrete flag, a piece of aluminium base
pressed into the ground to ground level or something similar. You can then screw the
ramp into the support material for a secure fixing.