5
Questions? We’re here to help!
Visit: shopelitegourmet.com for support on this product.
HOW TO USE
CHOPPING & BLENDING:
1. Ensure the product is unplugged from the electrical outlet.
2.
Place the Base on a flat, level, stable surface.
3. Fill the Small Cup or the Large Cup with the food that you
wish to chop/blend.
4. Screw the Flat Blade assembly or Cross Blade assembly
clockwise onto the Small or Large Cup until secure.
5. Turn the Chopper Cup Assembly upside down so that the
Blade assembly is on the bottom. Attach the assembled
Chopper by aligning the three tabs on the outside of the
Small or Large Cup with the three notches on the top inner
edge of the Base.
6. Plug into a standard 120-volt AC electrical outlet.
7.
Each Cup Assembly has three small tabs which fit into three
grooves on the top lip of the Base. Press down on the Cup
Assembly firmly and turn it counter-clockwise to lock into
place. Press and hold the Power Pulse switch to operate. To
prevent product overheating, limit continuous operation to
five seconds at a time.
8. To stop processing, let go of the Power switch. Wait until
the Blades stop completely before removing the Cup
Assembly, then turn it clock-wise to unlock it from the Base.
9. Unplug the product from the electrical outlet when it is not
in use or is left unattended.
NOTE:
Ensure that the rubber
gasket, located on the
inside bottom edge of
the blade assembly,
is in place. This will
prevent leaking.
CAUTION:
The product is not
intended for blending
hot liquids or frozen
solid ingredients. It
is recommended to
chop ingredients into
smaller portions
before freezing and
then allowing the
ingredients to defrost
slightly before mixing.
Large frozen solid
ingredients may
damage the cups. Use
crushed ice instead of
solid ice cubes.
-
USING DRINKING CUPS:
1. Ensure the product is unplugged from the electrical outlet.
2.
Place the Base on a flat, level, stable surface.
3. Add the ingredients that you wish to include in your drink
into one of the Drinking Cups. If attached, remove the
spill-proof lids before installing blade assembly.
4. Screw the Cross Blade assembly onto the Drinking cup.
5. Turn the Drinking cup so that the Blade assembly is on the
bottom. Attach the assembled Drinking cup by aligning the
3 tabs on the sides of the Drinking cup with the 3 notches
on the top inner edge of the Base.
6. Plug into a standard 120-volt AC electrical outlet.
7.
Each Cup Assembly has 3 small tabs that fit into 3 grooves
on the top lip of the Base. Press down on the Cup Assembly
firmly and turn it counter-clockwise to lock into place. Press
and hold the Power switch to operate. To prevent product
overheating, limit operation to five seconds at a time.
8. To stop processing, let go of the Power Switch. Wait until
the Blades stop completely before removing the Cup
Assembly; turn it clock-wise to unlock from the Base. Turn
the Drinking Cup so the Blade Assembly is on top. Unscrew
the Blade Assembly from the Drinking Cup; screw a Spill-
proof Lid onto the threads on the top of the Drinking Cup.
9. Unplug product from the electrical outlet when not in use.
-The Cup Assembly
MUST be locked in
order to operate.
5
NOTE:
The Cup Assembly
must be locked in
order to operate.
For liquid ingredients,
do not fill the
containers to their
maximum capacity.
Overfilling the Cups
could result in
spillage, causing
burns and/or
property/product
damage. A maximum
of ¾ of the capacity is
recommended.
-
-
-
Summary of Contents for EPB-1800
Page 2: ......
