8
ASSEMBLY INSTRUCTIONS
STEP 2
NOTE:
Extra help may be needed to hold the Front Post (#31) while connecting the cables and
wires.
—
Attach the Front Post (31) to the Main Frame (#1). Connect the Extension Sensor Wire (#32)
from the bottom of the Front Post to the Sensor Wire (#37) from the Main Frame.
—
Pull the tension connector from the Tension Control Knob w/cable (#30) and slide in between
the opening on the connector on the Extension Tension Cable (#36). Pull the Tension Control
Knob w/cable upward and slide the wire through the slot on the bracket.
—
Drop down the Tension Control Knob w/cable so the fitting sits firmly on top of the bracket.
—
Secure the Front Post to the Main Frame with four Allen Bolts (#9 ) and four Curved Washers
(#7).
1
7
7
7
9
29
30
32
9
9
31
30
32
37
36
36
37
