elit
1560
DIGITAL ISOLASJONSMÅLER MED KONTINUITET
25
VIII. Description of measurement operation.
1. Measurement of AC voltage (See Figure 4)
1. Insert red test pen in “.,.;y• jack (red hole) and black
test pen In “EARTH” jack (black hole).
2. Push the rotating switch to the gear • v• and connect test pen
In parallel with the power source or to both ends of the load to
be measured.
3. Directly read the measured voltage value from display.
4. To save 1he measured wltage value durill measurement,
just push the button “SAVE”.
Note:
- Do not Input the wltage higher than 1000V since higher
voltage may cause damage to the instrument
- Take specialcare to avoid electric shocking while
measuring high voltage and if necessary, wear the
insulation gloves.
- After completing measurement operation,disconnect the test pen
from the circuits to be measured.
- When the measured voltage Is higher than the safety
voltage 42VJOC,the meter display screen will display high voltage
warning prompt” f “±; when the input overvoltage is higher than
1OOOV, the meter will automatically output high voltage warning
prompt f “:t, which would flash on the top lefl comer of saeen
forwaming.
FIGURE 4
GB
