Eliminator Lighting - www.eliminatorlighting.com - Tri Disc 9 IR User Manual - Page 8
Eliminator Lighting - www.eliminatorlighting.com - Tri Disc 9 IR User Manual - Page 7
Tri Disc 9 IR Operating Instructions
3. When “G.XXX” is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. When “b.XXX” is displayed you are in Blue dimming mode. Press
the UP and DOWN buttons to adjust intensity.
5. After you have adjusted the RGB colors to make your desired
color you can then activate strobing by pressing the SET UP but-
ton to enter the Flash (strobe) mode.
6. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
Sound Active Mode:
In this mode the unit will react to sound, and chase through the differ-
ent colors.
1. Plug the fixture in and press the MODE button until “SoXX” is dis-
played. “X” represents the sound active mode (1-15) currently dis-
played.
2. The fixture will now change via sound.
3. Press the SET UP button to adjust the sound sensitivity. “SJ-X”
should be displayed. Use the UP or DOWN buttons to adjust the
sensitivity. “SJ-1” is the least sensitivity, “SJ-8” is the most.
Auto Run Mode:
In this mode the Tri Disc 9 will run 1 of 16 auto programs. The auto
run program can be either a fade program or a simple color change
program.
1. Plug the fixture in and press the MODE button until “APXX” is dis-
played. “XX” represents the program number (1-16) currently dis-
played.
2. After you have chosen your desired program you need to decide
if you would like the program to fade through colors or simply
change. Press the SET UP button until either “SP.XX” (color
change) or “F-XX” (color fade) is displayed.
3. If you select color change, use the UP and DOWN buttons to
adjust the speed between “SP.01” (slowest) and “SP.99” (fastest).
Once you have set your desired color change speed, press the
SET UP button to move on to “F-XX” (color fade). Use the UP or
DOWN buttons to set the color fade speed to “F-00”. This means
the color fade is off, and the fixture will now color change at
the speed you have set. To run the fixture in color fade, reverse
Tri Disc 9 IR Operating Instructions
the instructions. Set your color fade speed and set the color
change speed to “SP.01”.
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CL.XX” is
displayed. “XX” represents the current color number displayed.
2. There are 35 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected
your desired color you can activate strobing by pressing the SET
UP button to enter the Flash (strobe) mode.
3. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as spot lights. The Tri
Disc 9 IR has 7 DMX modes: 1 Channel mode, 2 Channel mode, 3
Channel mode, 4 Channel mode, 5 Channel mode, 6 Channel mode,
and a 7 Channel mode. See pages 13-15 for each modes’ DMX traits.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
“d.XXX” is displayed. “XXX” represents the current displayed ad-
dress. Use the UP or DOWN buttons to select your desired DMX
address. then press the SET UP button to select your DMX
Channel mode.
3. When you press SET UP “ChXX” should be displayed. “XX” repre-
sent the current DMX Channel Mode.
4. Use the UP or DOWN buttons to scroll through the DMX Channel
modes. The Channel modes are listed below:
• To run the 1 Channel Mode, press the MODE button until “Ch01”
is displayed. This is the 1 Channel DMX Mode.
• To run the 2 Channel Mode, press the MODE button until “Ch02”
is displayed. This is the 2 Channel DMX Mode.
• To run the 3 Channel Mode, press the MODE button until “Ch03”
is displayed. This is the 3 Channel DMX Mode.
• To run the 4 Channel Mode, press the MODE button until “Ch04”
is displayed. This is the 4 Channel DMX Mode.
