Eliet Minor 4S Manual Download Page 4 | Manualshive

Page: 4 / 58

Eliet Minor 4S Manual Download Page 4

English

4

3. Welcome

Welcome to the family of ELIET users.

We thank you for the trust that you have placed in ELIET and we are convinced that you have
purchased the very best machine. The operating life of your ELIET machine depends on how you
care for your machine. Strict adherence to the instructions and suggestions in these manuals will
guarantee optimum performance of your ELIET machine for a very long time.

Read this manual carefully before operating the machine. This will prevent you from operating
the device incorrectly. For your own safety, please observe the safety instructions specified in
the relevant chapter. Even if you are thoroughly familiar with operating such equipment, it is still
advisable to read these pages carefully.

All ELIET equipment and machines are continually being updated and improved and therefore
the specifications of your machine may differ slightly in terms of shape, technology and
accessories. The descriptions and technical data in this manual are accurate at the time of
printing. Certain illustrations and descriptions may not apply to your specific machine, but
instead relate to a different version of the machine. For this reason, discrepancies or deviations
in the texts and illustrations in this manual cannot give rise to any claims, as you may well
understand. If you still have questions after reading this manual, please contact your ELIET
dealer.
You can find an official ELIET dealer near you at

www.eliet.eu

.

ELIET AT YOUR SERVICE

During office hours ELIET’s help desk will make every effort to
answer all of your questions:

European customers

US customers

GMT +1: from 8.00 am to 6.00 pm

Ph (+001) 412 367 5185

Tel: +32 56 77 70 88

Fax (+001) 412 774 1970

Fax: +32 56 77 52 13

[email protected]

[email protected]

www.elietusa.com

«
...
2
3
4
5
6
...
»

Summary of Contents for Minor 4S



























































Reviews:

No comments