1
2
52
English
B2 Disassembling the blow chute
In case of blockage of the blow chute, or if the machine needs to be transported, the blow chute
can be disassembled.
• Turn off the engine.
• Loosen the four bolts from the blow chute. (1)
• Remove the blow chute by sliding it upwards; remove any
blockage (2).
• Accurately reassemble all the parts and securely tighten the
bolts.
• Depending of the operating set-up, the blow direction of the
chute may be adjusted by giving the blow chute a quarter turn
left or right from its standard position and installing it in its
new position.
Warning:
Never operate the machine without the blow chute attached. Doing so could
lead to serious injury from projected debris and serious cuts from contact with
rotating parts.
Caution:
Do not start the machine before all the parts have been reassembled into their
original position.
