Electronic Scale – models EVLplus хх LМ1, BM1, LT1, BT1
21
a. Place a load of 200g or more and press
PRN
to print a test label
b. Choose a number of the article (PLU), which will be weighed
-
By using the numerical keyboard, enter the desired article
number: For example: 85 followed by the
PLU
key.
c. Place the load
d. After the readout is stabilized press
PRN
to print the label and to record
the measurement
e. Remove the load and place the next one…..
8.3.2. Label print by using the keyboard to enter a number of particular article.
Method of work:
Enter the number of articles by using the numerical keyboard
Press
* .
Enter the price per unit or the PLU number
Print by pressing
PRN
8.3.3. Print of group label when working with weighing or counting products.
Method of work:
press
СН
to switch to “group” mode
press
*
to switch between the accumulated weight and the accumulated number
In the desired mode weighing/counting press
PRN
to print group label
The accumulations are cleared by double pressing
MC
8.3.4. Pre-labeling – manual input of the weight and printing the label
Activate “Service mode” 2.
PRG
,
DW
and after that press the
PRG
key
rapidity till
“rELAb 0”
is displayed. By pressing
С
from the numeric keyboard
change the blinking „0” to „1” .Exit with
СР
.
In “Weighing Mode” double press
DW.
On the display for price per unit will be displayed blinking “PLU000” - enter the
desired PLU number followed by
PLU.
On the display for price will be displayed “Е 0.000”, showing that you are in
mode of manual input of weight. Enter the desired weight by using the numerical
keyboard, followed by
PRN.
To change the PLU number, press
PLU
, enter the number and press the
PLU
key again.
Exit by pressing
CP.
8.4. “Service Mode” 1 and 2
