Owner’s Manual
20
5. Place the desired number of details. On the “Total Price” is displayed the number of
the details blinking text „count”.
8.2.4 Work without PLU
Perform the following steps
1. Turn on the scale, after all tests are performed double click the „СР” key.
2. As a result on the middle line of the display is shown „0”, on the weight line is shown
„0.000” and „base”
3. Place the “Basic number of details” and enter their number by the numeric keyboard.
The entered number will be displayed on the “Price per unit” line.
4. By pressing the
PRG
key, the number and the weight are set and the scale is in
“Counting mode” of the details
5. In the middle line the „base” text and the value of the
„Basic number of details”
is
blinking.
6. Place the desired number of details. On the “Total Price” is displayed the number of
the details blinking text „count”.
8.3. Labeling and Pre-labeling Mode
8.3.1. Labeling! To work with a label printer, the labels and the articles (PLU) need to be
previously unloaded in the scale. This is done by using: Label editor and Parameter editor
software offered by the manufacturer. Depending on the memory and the modification is
possible to set the following data for each article (PLU): price, tare, name (up to 6 lines),
article number, expiration date. Additional information can be set: 3 different consignment
numbers, counter number, operator’s number. The scale has a clock for real time, which can
be also presented on the label or used for calculating the expiration date of the product.
Perform the following steps:
1. Turn on the scale by pressing
ON/OFF
a. The scale performs all tests and weights the tare.
b. Turn on the printer
2. Method of work
b
count
b
