ELICA LIB0099060A, Use, Care And Installation Manual, Page: 5 / 36

5
List of Materials
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp edges.
WARNING!
Remove the protective film covering the product before putting into
operation.
Parts supplied
• Hood assembly with blower and light bulbs
• Metal grease filters
• Duct covers
• Hardware bag with:
• Use, care and installation guide
• Installation template
• 4 - Duct cover plastic clips
• 4 - 6 x 16 mm blower mounting screws
• 4 - 5 x 45 mm mounting screws
• 6 - 3.5 x 6.5 mm mounting screws
• 2 - 3.5 x 9.5 mm mounting screws
• 60 - 4.2 x 8 mm mounting screws
• T10 TORX®† adapter
• T20 TORX®† adapter
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• 8” round metal vent system
Product Dimensions
Parts not supplied
Optional Accessories
Tools/Materials required
• Level
• Drill with 1¼” (3.2 cm),⅛” (3.2 mm), and
5
⁄
16
” (7.9 mm)
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
Max 46
3
⁄
16
” (117.4 cm)
Min 33
2
⁄
8
” (84.4 cm)
12
6
⁄
8
”
(32.3 cm)
27”
(68.6 cm)
36” (91 cm)
42” (106.2 cm)
8”
(20.32 cm)
12
1
⁄
8
”
(30.8 cm)
13
3
⁄
16
”
(33.5 cm)