ELICA ENT432BL, Use, Care And Installation Manual

Page: 22 / 108

21
User Servicing and Maintenance Instructions
Hob maintenance
Caution! Before any cleaning or maintenance, make sure the cooking zones are switched off and the heat indicator has turned off.
Cleaning
The hob must be cleaned after each use.
Important:
Do not use abrasive sponges, scouring pads. Their use, over time, may ruin the
glass.
Do not use chemical irritants, such as oven sprays or stain removers.
After each use, leave the hob to cool and clean it to remove deposits and stains
caused by food residue.
Sugar or food with a high sugar content damages the hob and must be
immediately removed.
Salt, sugar and sand may scratch the glass surface.
Use a soft cloth, paper towel or specific products to clean the hob (follow the
Manufacturer's instructions).
DO NOT USE STEAM JET CLEANERS!!!
Important:
If liquids accidentally or excessively leak out of the pots, the drain valve located on
the lower part of the product can be opened so as to remove any residue and be
able to clean in conditions of maximum hygiene.
Fig. 23
For a more complete and in-depth clean, the lower tray can be completely
removed.
Fig.24a - 24b
Extractor fan maintenance
Cleaning
For cleaning, use ONLY a cloth moistened with neutral liquid detergents. DO NOT
USE CLEANING UTENSILS OR TOOLS!
Avoid the use of products containing abrasives.
DO NOT USE ALCOHOL!
Grease Filter
Grease filter
Fig. 15
Traps grease particles generated by cooking.
Must be cleaned once per month (or when the filter saturation indication system
indicates this need), with non-aggressive detergents, either manually or in the
dishwasher at a low temperature and in a short cycle.
When cleaned in the dishwasher, the metal grease filter may discolour, but its
filtering characteristics remain unchanged.
Charcoal Filter
Activated carbon filters
(Only for Filtration Version)
Fig. 17 – 17a – 17b – 17c
Traps unpleasant odours generated by cooking.
The product is equipped with four filter packs that trap odours thanks to the
activated carbons. The activated carbons are incorporated into a ceramic
structure, making them easily and completely accessible by impurities, thus
creating a large absorption surface.
The ceramic activated carbon filters will become saturated after a more or less
prolonged period of use, depending on the type of cooking and frequency with
which the grease filters are cleaned. These odour filters can be thermally
regenerated every 2/3 months in an oven preheated to 200°C for 45 minutes.
Regeneration allows a maximum filter lifespan of 5 years.