22
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
M
M
a
a
n
n
u
u
a
a
l
l
9.
Measurement Mode
The main function of ERK-9000 is refractive, keratometry measurement, keratometry/refraction
continuous measurement and base curve measurement of contact lens.
After enough practice, through model-eye(chapter 9.4) patients should be measured.
[ Changing the measurement mode ]
The screen left / right in the [MODE] button to touch activated POP-UP window you can select the
desired mode. The POP-UP window automatically disappears about 3 seconds.
The screen left / right in [Previous mode select
] Touch button or [Next mode select
] Touch
button to touch you can select the previous or next mode.
In the upper right corner of the screen [HOME
] Touch button to run the MENU mode and MENU
mode you can select the desired measurement mode.
[ Measurement start mode ]
Manual measurement mode
The Common measurement methods measure the operator to push the button the measurement will
start.
Auto measurement mode
Operator do not need to press the measure button is focused to the center and automatically starts
measuring.
Measurements in the automatic measurement mode by pressing the button will start the
measurement. To change the auto measurement mode, the left side of the screen, the [MANU] a
touch of the button or press the MEASURE page User Setup system on the AUTO START and
AUTO or AUTO-P can be chosen.
[
MANU] Touch the button [AUTO] AUTO-touch buttons and text changes to remaining Number will
be displayed below. Measurement of the MEASURE page number in the User Setup AUTO REPEAT
is the value of the item you want, change the value.
< Manual Measurement Mode > < Auto Measurement Mode >
[ IOL Measurement mode ]
Intraocular lens (IOL) or cataract surgery patients as a measure of patients are turbid lens [IOL]
touch button, please press the measure.
REF mode or RK-mode measurement modes are supported on the IOL.
IOL measurement mode is active or inactive on the left of the screen, the button can be confirmed by
an IOL.
< Inactive IOL> < Active IOL >
[ Enter NAME ]
Press [NAME
] Touch button.
The patient's name can be enter to a maximum of 16.
The patient's name on the top right corner of the screen scrolls are displayed. The patient's name
will be printed when you print.
