Type Designation
- 40 -
12
Type Designation
Figure 36: Type designation
LIMAX2
Series / Type:
LIMAX2 = LIMAX02 (1-Kanal)
Signal cable length:
030
= 3,0 m (Standard)
050
= 5,0 m
Other on request
Resolution:
62N5
= 62,5 µm = 0,0625 mm
0125
= 125 µm = 0,125 mm
0250
= 250 µm = 0,25 mm
0500
= 500 µm = 0,50 mm
1000
= 1000 µm = 1,00 mm
-
-
-
SN-number:
00
= standard version
01
= special version
-
1000
CO0T
-
Interface:
2320
= RS232 [standard protocol, RS232 / position]
2321
= RS232 [extended protocol RS232 / position & speed]
4220
= RS422 [standard protocol, RS422 / position]
4221
= RS422 [extended protocol RS422 / position & speed]
4850
= RS485 on request
CN0
= CAN
[standard protocol, basic-CAN]
CO0
= CANopen
[Encoder Profil DS406]
CO1
= CANopen
[Elevator Profil DS417]
PNO
= Profibus
[according to IEC61158/IEC61784, standard ID 5, other on request]
SSB0
= SSI-Interface
[25-bit binary code / position]
SSG0
= SSI-Interface
[25-bit gray code / Position]
CAUTION:
-> CAN Interface is optional available with galvanic isolation / assembly CAN-load resistor selectable
-> RS232- Interface is never terminated!
-> RS422- & RS485- & SSI- Interface is basically terminated!
Options:
(Multiple choice possible)
U
= option unguided
PNO
= 1 pc. Flange plug M8, 1 pc. Flange plug M12 und 1 pc. Flange socket M12
D9M
= 9-pol. D-Sub-connector
[CAN & CANopen]
D9M1 = 9-pol. D-Sub-connector
[SSI / option NEWLIFT FST2]
D9M3 = 9-pol. D-Sub-connector
[SSI / option LödigeSEW]
D9F0
= 9-pol. D-Sub-socket
[RS232 / to connect to DEE/DTE ]
(open cable end if no option is selected!)
Terminated 120R (T)
Not terminated
CN0T (Standard)
CN0
Terminated 120R (T)
Not terminated
CO0T (Standard)
CO0
Terminated 120R (T)
Not terminated
CO1T
CO1 (Standard)
CN0TG
CN0G
CO0TG
CO0G
CO1TG
CO1G
SSG0
(Standard)
SSG0G
SSB0
(Standard)
SSB0G
Without galvanic
isolation
With galvanic
isolation (G)
CAN Interface
Without optocoupler at
clock input (terminated
120R)
With optocoupler at clock
input (G) (terminated
120R)
SSI Interface
D9M
030
00
