5
www.elgento.co
• Switch off and unplug before
fitting or removing tools/
attachments, after use and
before cleaning.
• Avoid contact with moving parts.
Keep hands and utensils out
of the appliance while blending
to prevent personal injury or
damage to the blender.
• The blade is sharp. Handle with
care.
• Never let the power unit, cord or
plug get wet.
• Never exceed the maximum
capacity.
•
DO NOT
attempt to bypass the
interlock system that powers the
unit on.
• Always operate on a flat surface.
• Unplug the blender when not in
use, before taking off or putting
on parts and before cleaning.
•
CAUTION!
Ensure the gasket
seal is correctly seated in the
blade assembly recess prior to
affixing the jug. Failure to do so
could result in the seal coming
into contact with the blades
resulting in damage.
•
WARNING!
The appliance may
emit a small amount of smoke
when it is first turned on. This is
due to manufacturing oils and/
or residue left on the motor.
There is no need for alarm and is
considered normal. The smoke
will eventually lessen once the oil
and/or residue disappears.
• In the unlikely event the appliance
develops a fault, stop using it
immediately and seek advice
from the Customer Support
Team.
HIGH VOLTAGE ROTATING PARTS
