ELGA PURELAB Classic - US, Operator'S Manual, Page: 21 / 53

PURELAB Classic Operator Manual ELGA
Page 16 PURELAB Classic Version 2 11/15
Step 4 - Connect Electrical Supply
1. PLUG mains power lead into the mains power socket
on the left-hand side of the PURELAB Classic unit.
2. PLUG mains power lead into mains socket.
Step 5 - Reservoir Level Connection
1. INSERT jack plugs into the level control socket located
at rear of unit and reservoir.
Note: If wall mounting the unit it is recommended
that the jack plug should be inserted prior to
locating the unit on the wall mounting bracket.
Fuse
ON/OFF
switch
Mains power lead
Mains power socket
Electrical Connections
Reservoir
RS232 level
connection
Reservoir Level Connection
Level
control