ELGA MEDICA Pro EDI, Quick Start Manual, Page: 3 / 10

ELGA MEDICA Pro EDI - US Quick Start Manual
MEDICA Pro EDI - US MANU40683 Ver.2
– 10/15
Page 1
1. INTRODUCTION
Use of this manual
ELGA LabWater strives to produce manuals that are as simple and accurate as possible. However, should you feel
they can be improved in any way please email us at
info@elgalabwater.com
This shortform manual guides you through the installation, commissioning and basic operation of the MEDICA Pro
EDI
– US
allowing you to obtain a guaranteed supply of purified water to meet your requirements. For more
information that is detailed refer to the Operator Manual supplied on CD.
Customer Support
Service support and consumable items are available from your local supplier or distributor. Please contact
info@elgalabwater.com for further information.
2. HEALTH AND SAFETY NOTES
WARNING!
WARNINGS ARE GIVEN WHERE FAILING TO OBSERVE THE INSTRUCTIONS
COULD RESULT IN INJURY OR FATALITY.
CAUTION!
Cautions are given where failure to observe the instructions could result in
damage to the equipment, associated equipment and processes.
2.1 Electricity
It is essential that the electrical supply to the MEDICA Pro EDI
– US
is isolated before any items are changed or
maintenance work performed.
The appliance coupler (mains lead) connected to the rear of the unit can be removed to isolate the power supply. If
access to this is restricted then it is recommended that access to the supply socket is easily available to disconnect
the electrical supply.
The unit must be earth. Use of the recommended appliance coupler will ensure adequate earth protection.
WARNING!
IF THE EQUIPMENT IS USED IN A MANNER NOT SPECIFIED BY ELGA, THE
PROTECTION PROVIDED BY THE EQUIPMENT MAY BE IMPAIRED..
2.2 Pressure
The water supply should be isolated and residual pressure released prior to removal of any components or carrying
out work on the unit.
Switch off the process and relieve pressure in the distribution loop by opening a point of use or dispense tap.
2.3 Sanitization Chemicals
During the automatic sanitization cycles, EfferSan
™ multi-purpose disinfecting tablet and Minncare cold sterilant are
used and the relevant safety information is included within the operator manual included on CD in the rear of this
manual.
Please refer to the manufacturer for material safety data sheets.