28
Owner's Manual
27
Owner's Manual
Pressing the Vol+ button repeatedly will cycle the TV through the three
possible settings as shown.
Pressing Vol- will cycle through the modes in the reverse order. Pressing
either SETUP or EXIT will exit the SETUP MENU FUNCTION leaving the TV
in the mode selected.
TV: This is the normal setting . In this mode all the features described in this
manual are functional.
VIDEO: In Video mode the audio and picture signal is derived only from the
Audio/Video input provided inside an unmodified TV.
Pressing the SETUP button on the infrared hand unit while in Video mode
only provides the ability to change the Video Mode setting.
PC:
In PC Mode the audio and picture signal is derived only from the Audio
and PC inputs provided inside an unmodified TV. The native resolution
of the PC mode input is 800 X 600.
Pressing the SETUP BUTTON on the infrared hand unit while in PC mode
brings up the PC MAIN MENU with the following functions.
CONTRAST - Use the VOL+/- buttons to increase or decrease the contrast
of the picture.
BRIGHTNESS - Use the VOL+/- buttons to increase or decrease the
brightness of the picture.
AUTO COLOR SET - Pressing the VOL+ or ENT buttons will cause the TV
to adjust the color level to an optimum level.
AUTO ADJUST - Pressing the VOL+ or ENT buttons will cause the TV to
center the picture on the screen.
H-POSITION - Use the VOL+/- buttons to adjust the horizontal position of the
picture on the screen.
V-POSITION - Use the VOL+/- buttons to adjust the vertical position of the
picture on the screen.
VIDEO MODE - Use the VOL+/- buttons to select the operating mode of the
TV. - TV, VIDEO, or PC
H
ow do I set What Channels the User May view
H
ow do I set What Channels the User May view
Fine Tune channel
If a dashed line or no color appears,
the screen is unstable, therefore try
channel adjustments.
(This is only available for analog broadcasting)
The “Fine Tune Channel” select, press the ENT.
The “Fine Tune channel”menu is active.
Press CH
to select “Auto” or “Manual”.
If minor channel adjustment is on manual,
then changing to the current channel will not
perform automatic channel adjustment.
Signal strength
(only available for Digital channels)
This shows the signal strength of the digital
channel shown in the background.
Press ENT when selected to activate the Signal
Strength Screen.
Feature Setting
You can check the version information of the
firmware in the Digital Tuning System.
The “Version information” select then press ENT.
Note: This only displays the version number of
the firmware installed in the DTS. The version
number of the TV firmware is shown on the
banner of the English SETUP MENU.
Video Mode
Select CH
Video Mode to change the picture signal source - TV, Video,
or PC.
Once Video Mode is selected the VOL +/- buttons can be used to
change the operating mode of the TV.
TV
VIDEO
PC
PC Main Menu
Contrast 50
Brightness 50
Auto Color Set
Auto Adjust
H-Position
V-Position
Video Mode : PC
To Select
+ -
Adjust