22
Owner's Manual
21
Owner's Manual
1. Press SETUP on the infrared hand unit.
2. Select CH
Channel Setup.
3. Press ENT to accept this selection.
4. Press CH
to select a Channel Setup option.
5. Press ENT or VOL+/- to accept indicated selection.
Note: The TV must be configured for the TV channels being supplied to it by
using Auto scan. This must be done before the individual channel Maps are
customized to reflect the desired list of channels for each service Level. Only
channels which are in the Master map may be present in a Channel Map.
Assign channel maps
This function sets which of the 6 channel maps is assigned to each of the 6
Service Levels. A Channel Map contains a list of those TV
channels the user is permitted to tune to in each Service Level. Before you
identify which channel map should go with which Service Level, you must
know which channels, the map contains. It is easiest to keep a written list of
the map number and the channels assigned to it. If you are unsure what
channels are in a given map then review the list as follows.
To identify which channels are included in a channel map ...
Select CH
ADD/Delete channels.
Press ENT to accept the selection.
Select CH
the desired map.
Press ENT to accept the selection and enter Add/Delete channels for the
selected Map #.
Press CH
to change channels. When + appears before the channel
number, this channel is included in the selected Map. When - appears before
the channel number, this channel is not included.
In addition to the + and
symbols the color of the channel number also
changes. Green indicates the channel is included and Magenta indicates that
the channel is not included.
H
ow do I Set What Channels the User May view.
SETUP MENU Ver : x.x.x
Rental: Free
Picture
Sound
Channel Setup
Features
Blocking
Language: English
To Select
To Accept
Main SETUP MENU
Channel Setup
Assign channel maps
Clear All/Add All
Remove Scrambled
Add/Delete channels
DTV Menu
Video Mode : TV
To Select
To Accept
Channel Setup MENU
Bass - Select CH
Bass to adjust the amount of bass in the sound.
Hold down VOL+ to increase or the VOL- button to reduce bass.
Treble - Select CH
Treble to adjust the amount of treble in the sound.
Hold down VOL+ to increase or the VOL- to reduce treble.
Balance - Select CH
Balance to adjust the balance in the sound.
Hold down VOL+ to increase right volume, and hold down VOL- to increase left
volume.
Mts - Select CH
Mts to adjust the mts of the sound.
Hold down VOL+, the selection will change in the order Stereo - Sap - Mono.
H
ow do I adjust the TV sound?
NOTES:
Reception of Stereo or SAP broadcast information is of course dependent on a
television station actually broadcasting such material. Not all stations do, and
some stations only broadcast Stereo/SAP material during part of the day.
If the L-10D ELF is set to STEREO and no stereo signal is being broadcast, a
MONO signal will automatically be received.
Volume Limit
When a patient increases the volume either by pressing VOL+ on the infrared
hand unit or on the control panel of the TV, the audio level will not increase
beyond the setting of the volume limit.
The user volume indicator always displays 0 to 100 but the absolute level is
scaled according to the Volume Limit setting. If Volume Limit is set to 50 then
when the user volume bar indicates 100 the actual volume heard will
be only 50 as set by the Volume Limit.
To change the volume limit ...
Select CH
Volume Limit to control the limit of the sound that the TV can
produce.
Press VOL
to accept this selection.
A sliding color bar appears on the screen and increases or decreases as you
make changes. So does the number (from 0 to 100) above the bar. When
the TV operates at the maximum sound limit, the number showing is 100.
Hold down VOL- to reduce the maximum sound limit.
Hold down VOL+ to increase, up to 100, the maximum sound limit.