Page 8
On/Off Plug-In Switch Advanced User Manual
Factory Reset & Misc. Functions
Resetting the On/Off Plug-In Switch
If needed, the On/Off Plug-In Switch can be reset locally by following these
steps. Only do this when your Z-Wave controller is disconnected or otherwise
unreachable. Beware that resetting your device will disconnect it from the sys-
tem:
1. Confirm that your On/Off Plug-In Switch is powered up.
2. Press and hold the BUTTON for at least 10 seconds then release. The LED
will blink once in a red color followed by 5 times in a pink color indicating
a successful factory reset.
3. The On/Off Plug-In Switch’s memory will be erased to factory settings.
Factory Reset & Misc. Functions
