12
2.3 SAFE USE AND MAINTENANCE
ATTENTION
-
It is prohibited for the machine to be used by:
o
Persons who have not read and understood the instructions given in this manual;
o
Inexperienced persons;
o
Persons not in good physical/mental health.
-
Periodically check that the machine and its protection devices are in perfect working order.
-
Before maintenance operations or repairs on the machine, disconnect power.
-
Maintenance operations and repairs must only be carried out by personnel trained to perform
these special functions.
-
At the end of the maintenance operations and repairs, before restarting the machine, the
technical foreman must check that the work has been finished, the safety device reactivated
and the protections reassembled.
-
The spare parts must correspond with those stipulated by the Manufacturer. Use only original
spare parts.
-
During maintenance operations and repairs, protective clothing must be worn, i.e. protective
eyewear, gloves for preventing cuts and mask for respiratory tract protection.
-
Do not use water jets to dean the machine.
SECTION 3
Transport and Installation
3.1 PACKAGING
The welder is wrapped up in a polythene film and subsequently packed in a three-layer waterproof
cardboard box sealed with adhesive tape and secured by means of a double strap.
3.2 SHIPPING
Whatever transportation method is used, either by (plane, sea or land) continental or intercontinental,
the machine tanks will be empty.
If
REQUESTED
or where
PERMITTED
:
The packaged electrolyte salts and/or bottled demineralized water, will be shipped according to the
rules, law and regulations of each host country destination.
