the soldering iron tip, it is recommended that the temperature is not
set higher than 380 degrees.
Menu use
Enter the menu setting interface: under the normal working temperature interface, long
press
the
encoder
button
(about
3s).
Enter
the
host
setup
mode!
Exit
menu
settings
interface: at the menu setting interface, long press the encoder button (about 3s), exit the
host setup mode!
Setting menu:
Enter the function item: rotate the encoder to the corresponding function, and short
press the button to enter the function item.
Exit setting function item: after setting the corresponding parameters with the encoder
rotary knob, short press the button to confirm exit the function item.
Temperature calibration