Iron tips maintenance
1.Please
put
appropriate
tin
on
the
adhering
head
of
iron
tip
before
powering
off
,
and please
clean
it
before
soldering.
2.Do not allow the iron tip to stay at high temperature for a long time to avoid dry burning.
3.In welding, do not rub the soldering tip with too much pressure to friction the solder,
which will damage the iron head.
5
4.Never clean iron head with a rough material or file.
.If
the
surface
is
oxided
and
does
not
absorb
tin,
you
can
use
fine
sanding
paper
(600-800).
Sand
it
carefully
and
use
isopropyl
alcohol
or
equivalent
solution
to
clean,
heat
to
200
℃
immediately adhering tin to prevent sticking tin and then oxidation.
6.Do not use chlorine or high acid soldering flux. Only use of synthetic resin or activated
resin flux.
7.The working temperature of the soldering iron tip is about 300
℃ ℃
to 380
, and the
working temperature should not exceed 450
℃
in a short time. Otherwise it will affect the
working life of the soldering iron tip!
8.Different welding scenes should be selected with different soldering iron tip. Large
welding spot or aluminum base plates will need to be touched to large soldering iron tip
(such as C4). Small welding spot can be usedC1, JL02, ILS, etc.
9.The
new
soldering
tip
is
used
for
the
first
time,
the
heat
up
may
be
slightly
slower,
and
it can melt tin 7 seconds after the normal use of 1-3 hours.
After-sales service
保修服务
This
station
comes
with
one
year
of
warranty.
Soldering
tips
are
not
covered
by
warranty
because
these
are
subjective
to
wear.
Proper
care
will
significantly
extend
the
lifetime of
the
soldering
tips.
