background image

Declaration of Conformity | UL approval | Homologation UL 

11 

Disposal / scrapping 

After unpacking the system, dispose of the packaging mate-
rial according to applicable regulations. 

After the last use, dispose of the product according to appli-
cable regulations. 

Scrapping 

When scrapping the product, applicable international, natio-
nal and local rules and regulations must be complied with. 

Please observe the recycling and dismantling properties of 
materials and components as well as environmental and 
health risks during recycling and disposal. 

Material groups like different plastics and metals must be 
sorted and put into the recycling system or disposed of. 

Disposal of electrotechnical and electrical components 

Disposal and recycling of electrotechnical and electrical 
components must be carried out according to the applicable 
laws or national regulations. 

12 

EC Declaration of Conformity 

EG-KONFORMITÄTSERKLÄRUNG 

Wir erklären hiermit, dass das/die nachfolgend genannte/n Produkte der 

Maschinenrichtlinie 2006/42/EG

entspricht/entsprechen. 

Produktbezeichnung: 

Rohrmotor 

  SunTop M-867 / -868 / -915 alle Varianten 

  SunTop L-868 / -915 alle Varianten 

Beschreibung:   

Einsteckantrieb für Markisen mit 867 / 868 / 915 MHz Funkempfänger 

Die Übereinstimmung der/s bezeichneten Produkte/s mit den wesentlichen Schutzanforderungen wird durch 
Einhaltung folgender Richtlinien und Normen berücksichtigt: 

 R&TTE-Richtlinie 

1999/5/EG 

 Niederspannungsrichtlinie 

2006/95/EG 

 

DIN EN 60335-2-97 (VDE 0700-97):2010 

 DIN 

EN 

14202:2004 

Beuren, 30.05.2012 

 

 

 

 

 

 

 

Ralph Trost 
-CE-Beauftragter-, -Doku-Bevollmächtigter- 

Fig. 14  EC Declaration of Conformity SunTop-915, 

type M and L 

13 

US: Addendum to the manual 
UL approval 

This device complies with Part 15 of the FCC Rules and 
with RSS-210 of Industry Canada. Operation is subject to 
the following two conditions: 

(1) this device may not cause harmful interference, and 

(2) this device must accept any interference recieved, inclu-
ding interference that may cause undesired operation. Any 
changes or modi

fi

 cations made to this device without the 

express permission of the manufacturer may void the user‘s 
authority to operate this device. 

14 

CA: Addendum au manuel 
Homologation UL 

Le présent appareil est conforme aux CNR-210 (et FCC 
part 15) d‘Industrie Canada applicables aux appareils radio 
exempts de licence. L‘exploitation est autorisée aux deux 
conditions suivantes : 

(1) l‘appareil ne doit pas produire de brouillage, et 

(2) l‘utilisateur de l‘appareil doit accepter tout brouillage 
radioélectrique subi, même si le brouillage est susceptible 
d‘en compromettre le fonctionnement. 

Technical modifications reserved

elero GmbH

Antriebstechnik

Linsenhofer Straße 65 

D-72660 Beuren

[email protected]

www.elero.com

Phone: +49 7025 13-01 

Fax: +49 7025 13-212

Summary of Contents for SunTop M











Reviews: