1.
General
The microprocessor-controlled elero sonneboy with rain sensor
input is a compact control unit for electric sunshade systems like
venetian blinds, awnings and blackout blinds.
The automatic control system controls the system automatically as
a function of light intensity (sunshine), wind and rain (snow).
There is also the option of controlling shade as a function of
temperature using the integrated temperature sensor (located on
the board).
This is an especially useful facility in conservatories for saving
heating costs. The wind monitor takes precedence over the light
sensor and the rain monitor and also in automatic and manual
operation so that the sunshade system is reliably protected from
damage. The rain monitor takes precedence only over the light
sensor and only works in automatic mode. Once the wind monitor
has responded, the sunshade system cannot be actuated for at
least the set pulse duration (30 sec.- 3 min.).
The "sonneboy” has a basic program in which light value,
temperature, wind value, pulse duration and delay time are all
pre-programmed, i.e. the automatic sunshade system can be
started without being programmed
.
If you would like to set different values for brightness, temperature,
wind, pulse duration or delay time, proceed as per Section 8.
2.
Technical data
●
Voltage:
230 V AC
●
Frequency:
50 Hz
●
Power draw:
4,5 mA
●
Switching current:
3 A, cos
ϕ
= 0,6
●
Rupturing capacity:
690 VA
●
Output:
2 relays (make contacts) potential-free
●
Input:
light sensor, wind monitor, rain monitor and
external switch
●
Pulse duration:
30 sec. to 3 min. (adjustable)
●
Ambient temperature:
–5 °C to + 50 °C
●
Type of protection:
IP 20
●
Installation location:
Dry areas (do not fit outdoors)
●
Basic program:
light value for extend 5, for retract 4,
temperature "- -", wind value 3, pulse
duration 3 min. and delay time for extend 5,
for retract 10 are pre-programmed.
These values can also be changed
4
