5.6.5 Four options for end position settings
Four different combinations of end position settings are
available that can be selected according to the technical
requirements of the fabric.
End position settings
(4 options)
possible with
A
Upper and lower end positi-
on freely con
fi
gurable
Suspension spring,
bands, belt
B
Fixed upper end position,
lower end position freely
con
fi
gurable
Suspension spring,
bands, belt,
limit plug,
angle bracket
C
Fixed upper
and lower end position
Anti-lift device,
fi
xed
shaft connector, limit
plug, angle bracket
D
Upper end position freely
con
fi
gurable,
fi
xed lower
end position
Anti-lift device
Fig. 7 Options of end position settings for RolTop
5.6.6 Option A:
Upper and lower end position
freely con
fi
gurable
Option A:
Upper and lower end position freely con
fi
gurable
①
In a medium fabric position, using the installation
cable, press the
UP
button
▲
until the fabric has
reached the desired upper end position.
The drive system starts, stops brie
fl
y and starts
again (as long as the UP button
▲
is pressed).
Corrections can be made with the buttons
▲
and
▼
.
②
Keep the
DOWN
button
▼
pressed until the drive
system stops automatically.
The upper end position is set.
③
Press the
DOWN
button
▼
again, until the fabric
has reached the desired lower end position.
The drive system starts, stops brie
fl
y and starts
again (as long as the
DOWN
button
▼
is pressed).
Corrections can be made with the buttons
▲
and
▼
.
④
Keep the
UP
button
▲
pressed until the drive sys-
tem stops automatically.
The lower end position is set.
End position setting of option A is completed.
Fig. 8 End position setting option A:
5.6.7 Option B: Fixed upper end position,
lower end position freely con
fi
gurable
Option B: Fixed upper end position,
lower end position freely con
fi
gurable
①
In a medium fabric position, using the installation
cable, press the
UP
button
▲
until the fabric has
reached the desired upper end position (to upper
limit stop).
The drive system starts, stops brie
fl
y and starts
again (as long as the UP button
▲
is pressed).
The drive system automatically stops when reaching
the upper limit stop.
②
Keep the
DOWN
button
▼
pressed until the drive
system stops automatically.
The upper end position is set.
Optional:
Activation of the relief function for the
upper limit stop: refer to section 5.6.2.
③
Press the
DOWN
button
▼
again, until the fabric
has reached the desired lower end position.
The drive system starts, stops brie
fl
y and starts
again (as long as the button is pressed).
Corrections can be made with the buttons
▲
and
▼
.
④
Keep the
UP
button
▲
pressed until the drive sys-
tem stops automatically.
End position setting of option B is completed.
Fig. 9 End position setting option B:
5.6.8 Option C:
Fixed upper and lower end position
Option C: Fixed upper and lower end position
①
In a medium fabric position, using the installation
cable, press the
UP
button
▲
until the fabric has
reached the desired upper end position (to upper
limit stop).
The drive system starts, stops brie
fl
y and starts
again (as long as the UP button
▲
is pressed).
The drive system automatically stops when reaching
the upper limit stop.
②
Keep the
DOWN
button
▼
pressed until the drive
system stops automatically.
The upper end position is set.
Optional:
Activation of the relief function for the
upper limit stop: refer to section 5.6.2.
③
Press the
DOWN
button
▼
again, until the fabric
has reached the lower end position (to bottom limit
stop).
The drive system starts, stops brie
fl
y and starts
again (as long as the DOWN button
▼
is pressed).
The drive system automatically stops when reaching
the lower limit stop.
④
Keep the
UP
button
▲
pressed until the drive sys-
tem stops automatically.
The lower end position is set.
Optional:
Activation of the relief function for the
lower limit stop: refer to section 5.6.3.
End position setting of option C is completed.
Fig. 10 End position setting option C:
©
elero
GmbH
US+CA | 7
Relief function | End position settings
