Symbol Signal word Meaning
Symbol indicating
successful grounding
with protection class I
(Protective conductor
system)
Fig. 3 Notation for damage to property and additional
information
The following example illustrates the basic structure of a
safety note:
SIGNAL WORD
Type and source of danger
Explanation of type and source of danger
►
Measures to avoid the danger
4
Product description
The RolMotion/D+ M is an electromechanical tubular drive
for roller shutters and textile sun protection. During opera-
tion it executes radial movements.
Commissioning of the RolMotion/D+ M with
elero
assembly cable.
Reduced torque in the upper and lower end position.
Silent hysteresis brake.
Obstacle and blocking detection.
Blind protection with free travel (torque limiting).
For the automatic detection and programming of the end
positions as well as for the reference runs (plug & play),
fixed stop points or angle brackets and rigid shaft con
-
nectors are required at the top and bottom.
The height of the blind must be adapted so that the push-
up protection (burglary protection) functions reliably.
Observe the relevant specifications of the roller shutter
manufacturer.
Cyclical reference runs compensate for changes in the
winding behaviour of the roller blind slats.
In addition to the usual travel profile (standard mode
travel profile), the RolMotion/D+ M drive also has a re
-
duced-speed travel profile (quiet mode travel profile).
Slow travel when placing the roller blind slats.
Slow travel with timed release.
4.1 Product contents
Drive with safety instructions and operating instructions and
any additional components and accessories according to
the order confirmation or delivery note.
4.2 Accessories
Connection and assembly cable, adapter sets, rigid shaft
connector, motor bearing, ProLine control units, radio re-
ceivers, radio sensors.
5
Assembly
WARNING
Important safety instructions
Observe all assembly instructions. Incorrect assembly can
lead to serious injuries.
►
Commissioning of the RolMotion/D+ M with elero assem-
bly cable for setting various functions.
►
Before installation, all cables and components that are
not required and all facilities that are not needed for oper-
ation with a power drive are to be disabled.
►
The required components are: drive, connection and
assembly cable, motor bearing, adapter sets, if neces-
sary rigid shaft connectors, sensors, control devices,
receivers.
►
If components are not delivered with the drive, these can
be identified via our catalogue “Drives and control units
for intelligent building technology” in the relevant valid
version. Further details can be found on our website
under “Contact - dealer search” and “Contact - contact
persons for specialist companies”.
►
The rated torque and rated operating time must be
suitable for the properties of the driven part (the blind).
►
The coupling of the drive with the powered part is
described in the section “Mechanical fastening”.
CAUTION
Risk of injuries due to hot surfaces.
The drive will heat up during operation, the drive casing
can become hot. Skin burns are possible.
►
Wear personal protection equipment (protective gloves).
Triggered by a possible material fault, knocks or impact
injuries may arise due to a gear fracture, burring fracture or
a coupling defect.
►
Suitable materials have been used for the engineering
design and random sample testing by means of a double
load test has been performed in accordance with
DIN EN 60335-2-97.
Risk of injury due to knocks or impact triggered by motor
bearings that are incorrectly mounted or engaged. Hazard
due to insufficient stability or steadiness and accumulated
energy (gravity).
►Selection of motor bearing by torque specifications.
►
The drive must be protected with all the enclosed safety
devices.
►
Check for correct engagement on motor bearing and the
correct screw tightening torques.
WARNING
Risk of injury due to electric current.
Risk of electric shock.
►
Always have electrical work carried out by an authorised
electrician.
Risk of injury due to electric current.
©
elero
GmbH
EN | 3
Safety | Product description | Assembly
