19 Repair
The RolTop is maintenance free.
20 Repair
Please contact your dealer if you have any questions.
Please always provide the following information:
• Item number and name on the type plate
• Type of fault
• Previous and unusual events
• Surrounding circumstances
• Own assumption
21 Manufacturer's address
elero
GmbH
Antriebstechnik
Maybachstr. 30
73278 Schlerbach
Deutschland / Germany
Phone: +49 7021 9539-0
Fax:
+49 7021 9539-212
www.elero.com
Please visit our website if you require a contact outside
Germany.
22 Disassembly and disposal
Dispose of the packaging according to current regulations.
Dispose the product after previous use in accordance with
applicable regulations.
Environmental information
No unnecessary packaging was used. The packaging can
be easily divided into three material types: Cardboard (box),
Styrofoam (padding) and polyethylene (bag, foam material
protective foil).
The device is made up of materials that can be reused if it
is disassembled by a specialist operation. Please observe
the local provisions on disposal of packaging material and
old devices.
Always expect additional danger that does not occur in
operation during disassembly.
WARNING
Danger of injury due to electric current.
Electric shock possible.
►Physically disconnect power supply lines and discharge
charged energy storage. Wait for at least 5 minutes after
deactivation for the motor to cool down and the capaci-
tors to lose their voltage.
►Use suitable, tested and stable climbing aids when per-
forming disassembly work above body height.
►All work at the electrical system must only be performed
by the staff described in the chapter "Safety instructions
for electrical installation".
Scrapping
During the scrapping of the product, the international,
national and regional-specific laws and regulations are to be
complied with.
Please make sure to consider material recyclability, ease of
dismantling, and separability of materials and components
as well as environmental and health hazards during recy-
cling and disposal.
CAUTION
Environmental damage at incorrect disposal
►Electronic scrap and electronic components are subject
to the hazardous waste rules and must only be disposed
of by approved specialist operation.
►Groups of materials such as plastics and metals of vari-
ous kinds are sorted for recycling and disposal process.
Dispose electrical and electronic components
Disposal and recycling of electric and electronic compo-
nents must comply with the applicable national laws and
regulations.
23 Conformity Declaration
elero GmbH hereby declares that this product corresponds
to the applicable directives. The complete declaration of
conformity can be found under www.elero.com.
24 Technical data and dimensions
The indicated technical data are subject to tolerances (ac-
cording to the respective applicable standards).
©
elero
GmbH
EN | 7
Relief function | End position settings
