9
Put the USB plug connected to DC 5V power supply
into the USB socket at the bottom of the device.
After power is turned on, the unit is powered by the internal lithium battery without the use of the
USB cable. When fully charged, it can be used for approximately 100 times for one minute each
usage. The Lithium battery can charge and discharge for approximately 500 times during the life
of the rechargeable battery.
7.6.1 - Start up
a. In standby mode, press the power button to turn
the eClear on at which point all symbols will be
briefly displayed on the screen. By default level
one operation will be selected.
b. Press the button (once) to move to different (higher)
suction strengths (between I, II and III).
c. To turn off the device keep the button pressed and
the device will automatically turn off.
d. In the charging mode by pressing the power
button the device will automatically cut off the
charging mode and switch to the working mode of
(first suction gear) operation.
The battery power is not displayed at this time.
After use, the nasal aspirator will return to the
charging mode if connected to the charger.
Notes:
1. Please choose an adapter that meets the IEC
60601-1-2 standard.
2. When the lithium battery power is low, you can
connect the USB cable with DC 5V input and
continue to use the nasal aspirator. While in use,
the nasal aspirator will disconnect the charging
of the battery. When the nasal aspirator is turned
off it will switch back to the charging mode if still
connected to the charger.
7.4 Using the Optional USB power
7.5 Using the internal battery
7.6 Operating instructions
USB
Summary of Contents for eClear
Page 1: ...Full User Manual...