elepho eClear Full User Manual Download Page 4

4

The warning symbols mentioned in this user manual give guidance of safety and correct method of 
use to avoid any harm to your body.

The warning symbols are as follow:

4. Important safety information

Warning symbol

Meaning

It may cause harm to body or article.

This product is only suitable for sucking nasal secretions. Please do not use it for other purposes.

Keep the suction nozzle clean and sanitary when in use.

This product should be stored at room temperature, charged to about 40% to 60% of capacity. In case of 
over-discharge, pack should be charged for one time every 3 months while storing and batteries should be 
discharge and charge after being stored more than a year in order to activate it and restore energy.

Please keep the nasal aspirator away from the sun or high temperature and humidity, and keep it in a 
clean, dry place with a temperature of 41˚F - 113˚F (5˚C - 45˚C) and a humidity of less than 85%.

Please store this product in the ambient temperature range of -4˚F - 131˚F (-20˚C - 55˚C). When the 
equipment is transferred from the lowest storage ambient temperature to the ambient temperature of 68˚F 
(20˚C), it takes 40 minutes to return to normal operation. It takes 40 minutes to return to normal operation 
from the highest storage ambient temperature to 68˚F (20˚C).

This device compiles with Part 15 of FCC 
(Federal Communications Commission) 
Rules.

The device and accessories and the 
packaging have to be disposed of 
waste correctly at the end of usage. 
Please follow local ordinances or 
regulations for disposal.

This symbol means type BF applied 
part.

Batch code

This symbol means the appliance is 
Class II equipment.

Restriction of Hazardous Substances.

Read the user manual carefully before 
using this device.

Recyclable

Date of manufacture

Manufacturer

IP22: The first number 2: Protected 
against solid foreign objects of 

Ф

 12.5 

mm and greater. The second number 2: 
Protected against vertically falling water 
drops when enclosure titled up to 15º.

SN

Serial number

Product conforms with European health, 
safety, and environmental protection 
standards.

Summary of Contents for eClear

















Reviews: