elepho eClear Full User Manual Download Page 3

3

Thank you for choosing the eClear from Elepho Inc. This product is used to clean a baby’s nose from 
mucus which is difficult to extract natually.

This product is for consumer use; it is made up of precise components; please keep it away from 
high temperature, humid environments, sunlight and dust. For correctly use, please read this user 
manual. Please keep it for future reference as required.

• 

This product is designed according to the Standard IEC 60601-1: 2012, Medical electrical 
equipment Part 1: General requirements for basic safety and essential performance and ANSI/
AAMI ES60601-1:2005/(R) 2012+A1:2012+C1:2009/(R)2012+A2:2010/(R)2012.

• 

This device has been tested in accordance with IEC 60601-1-2:2014 for EMC. This does not 
guarantee in any way that the device will not be affected by electromagnetic interference. Avoid 
using the device in high electromagnetic environment.

• 

The product is classified as Class II ME equipment when it works with an adapter.

• 

The product is internally powered when it is battery operated.

3.1 - Intended Use

The device which is a portable, hand-held, reusable, battery-powered suction device is intended to 
enable an adult to gently suction and clear excessive mucus from the nasal passages of an infant 
or child to facilitate easier breathing in a home care environment.

3.2 - Contraindications

Babies or children with the following symptoms should not use this product:

1) Nasal bleeding

2) Coagulopathy (condition of excessive bleeding or clotting or any other bleeding disorder)

3) Cartilage damage or nose injury 

4) Acute head, facial or neck injury.

3.3 - Lifespan

The lifespan of the product is 5 years.

1. Foreward

2. Declaration of conformity

3. Product type

Summary of Contents for eClear

















Reviews: