Installation Instructions
4
Step 1
Draw an installation plan showing the placement of the mats, floor sensor, and
junction box or boxes. Ensure the eRibbon mats are not laid in areas where fixed
appliances may be positioned. Decide a suitable position for the thermostat.
Step 2
The floor should now be prepared ready for the eFoam insulation. All loose particles
should be removed and the floor thoroughly cleaned and treated with any proprietary
sealants as normally required.
Step 3
Position and cut the efoam to fit your room size securing it with the spray adhesive and
using the utility tape to cover all eFoam joints.
Step 4
Position the double sided tape at regular intervals across the floor where the eRibbon
mats are going to be laid.
Ensure your eRibbon is correctly sized before you unpack the product.
Call 08714 740818 with any questions.
