41
OPERATING the FIREPLACE
Element4 Gas Fireplaces Rev# 07022020
European
Home
.com
GENERAL NOTES
NOTICE
Wiring of valve and receiver must be completed before starting ignition.
Failure to do so could damage the electronics.
Handset
• Two (2) AAA batteries are supplied and required.
• Low battery indicator on handset display.
Receiver
• An AC adapter is supplied with the fireplace and should be used instead
of batteries.
• NEVER use both batteries and an AC adapter.
• Batteries may be used for troubleshooting but should be removed in fa-
vor of the AC adapter when appropriate.
Software Version
Press and buttons simultaneously. Software version is displayed.
Handset Model Number
Press and buttons simultaneously. Handset model number is dis-
played.
Deactivate Functions
1. Install handset batteries. All icons are displayed and flashing.
2. While the icons are flashing, press the relevant function button and hold
for 10 seconds.
3. The function icon will flash until deactivation is complete. Deactivation
is complete when the function icon and two horizontal bars are display-
ed.
NOTE:
If a deactivated button is pressed, there is no function, and two
horizontal bars are displayed.
NOTE:
Deactivation remains in effect after change of batteries.
Activate Functions
1. Install handset batteries. All icons are displayed and flashing.
2. To activate a function, press the relevant button and hold for 10 se-
conds.
3. The function icon will continue to flash until activation is complete. Ac-
tivation is complete when the function icon is displayed.
The following Functions can be Deactivated/Activated
• CHILD PROOF (To activate press and buttons simultaneously.
displayed and the handset is rendered inoperable (except for off functi-
on).
• PROGRAM MODE
• THERMOSTATIC MODE (also deactivates Program Mode)
• ECO MODE
• MULTI-BURNER FEATURE
• COUNTDOWN TIMER
SETTING THE ELECTRONIC CODE
(First time use only.)
Radio Frequency Handset
To secure the communications between the handset and the receiver a
security code must be chosen from among 65,000 codes available. Pairing
the handset with the receiver automatically chooses one of these codes.
To pair the handset and receiver:
• Press and hold the receiver’s reset button until you hear two (2) beeps.
The first beep is short and the second beep is long. After the second
beep, release the reset button.
• Within the subsequent 20 seconds press the on the handset until you
hear two additional short beeps confirming the code is set. If you hear
one long beep, this indicates the pairing sequence has failed or the wi-
ring is incorrect.
NOTE:
This is a one time pairing only, and is not required after changing
the batteries of the handset or receiver.
Receiver Reset Button
OPERATING INSTRUCTIONS
Figure 82
