background image

8

USER INFORMATION

Example

By using the Y TEMP function you can keep the 

day temperature at 20 °C; while

you use the 4 TEMP function at night to maintain 

a temperature of 15 °C.

Setting day/night temperature

By using the SET button, you will go through the 

following functions:

MAN →       TEMP →       TEMP → (P*)TIMER → 

MAN

Briefly press the SET button to enter 

the       TEMP or the      TEMP position.

Press the SET button until the temperature on the 

display flashes.

Set the required temperature by using the buttons     

   and   

    

!Caution - The minimum temperature you can set 

is 5 °C / 40 °F;

- Control of the night temperature is switched off 

by lowering the temperature

until two stripes (“--”) appear on the display.

Press the OFF button or wait until position

      TEMP or      TEMP appears on the

display.

Activating the thermostat function

For activating the thermostat function, you must 

proceed with the following

steps:

Place the appliance in the standby (pilot burner) 

position using button

(small flame).

Set the day/night temperature.

Choose the       TEMP or      TEMP function using 

the SET button.

Timer for thermostat function

Using the timer enables you to set two times per 

24 hours for switching on the day temperature 

and two times per 24 hours for switching on the 

night temperature.

In order to control the night temperature, it should 

be set to at least 5 °C / 40 °F.

If the night temperature is set to the “-- ” position, 

the appliance will remain in the standby position. 

The  appliance  will  only  switch  on  at  the  next 

switch-on time of the day temperature.

The appliance must be in standby position in order 

to be controlled by the timer.

Example of switch times

You have set a day temperature and night 

temperature of, for example, 20 °C and 15 °C.

P1         TIMER = 7 hours; the temperature will 

go to 20 °C at 7 am.
P1        TIMER = 9 hours; the temperature will 

go to 15 °C at 9 am.

P2          TIMER = 17 hours; the temperature will 

go to 20 °C at 5 pm.

P2       TIMER = 22 hours; the temperature returns 

to 15 °C at 10 pm.

Summary of Contents for Modore 100 H













































Reviews: