Element TurboSwivel EV02AB12GY User Manual Download Page 9

Page: 9 / 11

USER MANUAL

FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT

TROUBLESHOOTING

WARNING:

The plug must be removed from the power socket before any

maintenance or replacement. If the power cord is damaged, replace them

only by the factory or maintenance center or similarly qualifi ed persons.

VACUUM CLEANER WON’T RUN:

1. Vacuum cleaner is not plugged in

2. Blown fuse/tripped breaker

VACUUM CLEANER WON’T PICK UP DIRT:

1. Dirt cup is full

2. Filter dirty

3. Hose not secure

4. Dirt cup not in place

5. Vacuum path clogged

6. Rotating power brush drive belt broken

7. Drive belt stretched

8. Floor brush bristles worn

9. Floor brush jammed

VACUUM CLEANER WON’T RUN:

1. Check electrical plug

2. Check/replace fuse or reset breaker

VACUUM CLEANER WON’T RUN:

1. Empty dirt cup

2. Check, remove debris or clean

3. Check to be sure hose is snapped into place at

both ends

4. Make sure dirt cup is fully inserted and dirt cup

release handle is pushed in completely

5. Visually check air passageway, hose inlet, and

hose for anything that might be obstructing the

vacuum path. Carefully remove blockage

6. Replace drive belt

7. Check drive belt area and remove obstructions

Replace drive belt if necessary

8. Replace fl oor brush

9. Remove fl oor brush and clean debris from brush

and ends Check drive belt for any damage

POSSIBLE CAUSES

REMEDIES

REPLACEMENT PARTS

www.eureka.com

Image

Part Name

Part Number

3-in-1 Tool

Pet (H)airBrush

Washable Foam Filter

Brushroll

Handle Hose

Drive Belt

Dust Cup

B0105

B0104

B0101

B0102

B0106

B0107

B0109

www.eureka.com

Summary of Contents for TurboSwivel EV02AB12GY












Search results

Summary of Contents for TurboSwivel EV02AB12GY

Reviews:

Related manuals for TurboSwivel EV02AB12GY

Brands by name

Popular brands

Element TurboSwivel EV02AB12GY, User Manual

Search results

Summary of Contents for TurboSwivel EV02AB12GY

Reviews:

Related manuals for TurboSwivel EV02AB12GY

Brands by name

Popular brands