USER MANUAL
12
FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT
13
WARNING:
Turn off and unplug vacuum cleaner before performing
maintenance to the vacuum cleaner.
Warning:
Ensure that the unit is in
an upright position and power is off
when you remove the filter.
Locate and unlock filter cover as shown.
Push left to un-lock, right to lock.
Wash using lukewarm water until the water
runs clear. Allow to air dry for 24 hours before
re-using. Do not use a hair dryer or other
heating methods to dry.
To open the pet tool for internal
cleaning, rotate, unlock and
remove the plastic locking
ring as shown.
Pull up on the plastic upper cap
of the pet tool as shown.
Remove any blockage or
debris and carefully, without
damaging the bristles or belt,
cut any build-up of hair or string
wrapped around the rotating
bristle brush with scissors.
MAINTENANCE AND CARE
Clean the air outlet
Gently tap the filter over a garbage bin,
removing dirt and debris.
Open the cover upwards and
remove the filter.
Clean vacuum and tools
MAINTENANCE AND CARE
Cleaning Brush Roll
WARNING:
Turn off and unplug vacuum cleaner before performing
maintenance to the vacuum cleaner.
DO NOT
clean the vacuum cleaner, components or accessories using
petroleum or any other flammable liquid or solvents.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components
and accessories. After cleaning, wipe off the moisture on the vacuum cleaner,
components and accessories with a dry cloth.
DO NOT
place accessories, tools or components in a dishwasher.
Cleaning Vacuum And Tools
Carefully remove any string, hair or debris that may be
wrapped around the brush roll.
You can use a tool such as a small knife or scissors to
carefully, without damaging the bristles, cut any build-up
of hair or string wrapped around the rotating bristle brush.
