Element P303BT User Manual Download | Manualshive

Page: 36 / 53

background image

Element P303BT User Guide I Page 36 of 53

Enable Matrix 2 Of 5

Disable Matrix 2 Of 5 (Default)

Message Length

Message length can be set to the maximum value, minimum value. The value is valid between the maximum and the
minimum.
The maximum value and minimum value can be set using Programming command. Please check the programming
command guide for the detail.
Matrix 2 of 5 max length command: 020803. The parameter of this command can be set from min to 80.
Matrix 2 of 5 min length command: 020802. The parameter of this command can be set from 1 to max.
Example: Set the Barcode Message length of the minimum value is 10; the maximum value is 25.
Programming command: Max: 02080325 ; Min: 02080210.

5.9

Industrial 2 Of 5

Enable/Disable Industrial 2 Of 5

Enable Industrial 2 Of 5

Disable Industrial 2 Of 5 (Default)

Message Length

Message length can be set to the maximum value, minimum value. The value is valid between the maximum and the
minimum.
The maximum value and minimum value can be set using Programming command. Please check the programming
command guide for the detail.
Industrial 2 of 5 max length command: 020603. The parameter of this command can be set from min to 48.
Industrial 2 of 5 min length command: 020602. The parameter of this command can be set from 1 to max.

«
...
34
35
36
37
38
...
»

Summary of Contents for P303BT






















































Reviews:

No comments

Related manuals for P303BT

Brand: Raven Pages: 2

Brand: Microtek Pages: 10

TellerScan 220E

Brand: Digital Check Pages: 18

WorldCard Color

Brand: Penpower Pages: 76

Brand: Banner Pages: 94

Brand: Worth Data Pages: 1

Brand: Datalogic Pages: 2

Brand: Kaiser Baas Pages: 2

MaxiDASMaxiCheck DS808

Brand: Autel Pages: 112

Brand: Radio Shack Pages: 52

Brand: Radio Shack Pages: 64

Brand: Radio Shack Pages: 83

pro 95 - 1000 Channel Dual-Trunking Scanner Radio

Brand: Radio Shack Pages: 92

Brand: Radio Shack Pages: 96

Brand: Radio Shack Pages: 92

Brand: Sporty's Pages: 26

Brand: 3D Histech Pages: 22

Brand: Xerox Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands