Element 455W, User Manual

Page: 18 / 34

Element 455W User Manual Page 18 of
34
1. Follow the steps in Chapter 3-1 to disassemble the stand from the LCD panel.
2. Remove the thumb screw (x1) from the VESA top cover and then pull the
cover up.
3. Attach the 11.6" 2
nd
display module to system by fastening the thumb screw
(x1).
4. Route the mini display cable through the hole of the stand as picture shown.
5. Attach the stand to the LCD panel
and fasten the thumb screw (x1).
6. Connect the mini display cable to
FeDP port on the systems IO
panel. Make sure the system is
powered off.
* Please note the cable cover and the
stand front cover (refer to Chapter
3-2 and 3-3) have to be removed
before routing the cable.