70
Fig. 1
SG350 : 0,35 oil
SAE15W-30
We strongly advise you to measure a quantity of oil with a test tube and put the oil into the
engine in the tube A (after unscrewing the dipstick). Control the oil level after this operation
using the dipstick B.
This control is made with the machine in horizontal position. Respect the following method.
Wipe carefully the dipstick B with a rag paper before introducing the dipstick in the tube A.
DO NOT SCREW THE DIPSTICK, but put it at full contact on the top of the tube A.
The correct oil level is at MAX position on the dipstick. Repeat this operation several times and
be sure that the correct quantity of oil is in the engine.
NOTE: IN ANY CASE THE OIL LEVEL MUST ALWAYS BE BETWEEN THE "MAX." AND
THE "MIN." SIGN ON THE DIPSTICK B.
If the engine is used with oil level higher than the “MAX” sign, you have a risk of blocking the
engine, and if oil is spread on the paper filter, you must imperatively replace the paper filter
with a new one and this replacement is not covered by warranty.
If the engine is used with a level less than the "MIN." sign, you have a very high risk of seizure
of the engine.
Check the oil level before each use of the machine.
CAUTION: The defects due to non-following the recommendations in this manual will
not be covered by the warranty.
Summary of Contents for 5411074177263
Page 12: ...12 6 1 1 6 1 2 6 1 3 6 1 4...
Page 37: ...37 6 1 1 6 1 2 6 1 3 6 1 4...
Page 62: ...62 6 1 1 6 1 2 6 1 3 6 1 4...
Page 78: ...78...
