66
THE BLADE: the blade is made of pressed steel, in order to obtain a clean work sharpen the
blade frequently, around every 25hours of work. Be sure that the blade is always well balance,
introduce a small iron axle(
φ
2 or
φ
3 mm) in the central hole of the blade, it should stay
horizontal.
If the blade does not stay horizontal balance it by taking off some metal on the side, which is
down.
YOU MUST ONLY USE THE MANUFACTURER BALDE IT SHOULD BE REFERENCED
AND WEAR THE MANUFACTURER BRAND “ELEM GARDEN TECHNIC”
To remove the blade, unscrew the screw,
○
,1check the blade support and change all spare
parts if they are worn out or damage.
When reassembling the blade, make sure that the cutting edges face in the direction of the
engine rotation. The blade screw must be torque to 3.7 K·gm(37Nm) with a TLnamometric
tool.
1
Ref : G1510010000
40cm
ONLY USE ORIGINAL SPARE PARTS. SPARE PART OF BAD QUALITY CAN INVOLVE
IMPORTANT DAMAGES TO YOUR LAWNMOWER AND BEPREJUDICIAL FOR YOUR
SECURITY
Summary of Contents for 5411074177263
Page 12: ...12 6 1 1 6 1 2 6 1 3 6 1 4...
Page 37: ...37 6 1 1 6 1 2 6 1 3 6 1 4...
Page 62: ...62 6 1 1 6 1 2 6 1 3 6 1 4...
Page 78: ...78...
