Elem Garden Technic 5411074167547, Original Instructions Manual

Page: 94 / 139

94
10. SPECIFICATION
Engine
Displacement
25.4 cm ³
Power 0.9kW
Idle speed min
-1
3000+/-300
Speed min
-1
10500
2 Time ratio petrol: oil 30: 1 (95/98oct: SAE 10W-30)
Fuel tank 290 cm³
Ignition system
Candle
L7T/LD
Electrode gap, 0.6-0.7 mm
Lubrication system / fuel
Capacity of lubricating oil tank chain, 180 ml
Type of oil pump Automatic pump with automatic adjustment
Weight
Chain saw without bar or chain, empty tanks, kg
3.7
Chain / chain guide
The Saw
12” ref 3/8 LP-45
Guide Guide Star 12’’ – ref AP12-44-509P
specified gauge 0,05"
Standard length guide / cm
10/26
Guide lengths recommended inches / cm 10/26
Cutting length, inch / cm 10/26
Pitch, inch / mm 0.375
Thickness of the guide bar 1.27/0.05 mm''
Type of driving wheel / the number of teeth Spur 9.525 / 6
Chain speed at max power, m / s
20.0
Noise emission values measured according to relevant standard EN ISO 4871 :
Acoustic pressure level
LpA 93.4 dB(A) K = 3 dB(A)
Acoustic power level LwA 110 dB(A) K = 3 dB(A)
ATTENTION !
The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
Weighted root mean square acceleration according to relevant standard. :
Front handle: 12,1, K=1,5
Rear handle: 18,6, K=1,5
The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another that the declared vibration
total value may also be used in a preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used and of the need