Elem Garden Technic 5411074145699 Original Instructions Manual Download Page 19

Page: 19 / 29

secure stance. The power tool is guided more
secure with both hands.

Wait until the machine has come to a

standstill before placing it down.

Other persons and animals should remain at a

distance of 3metres or more when the machine is
being used. The operator is responsible for third
persons in the working area.

Never grasp the blade of the hedgecutter.

Children or persons unfamiliar with these

instructions must not operate the hedgecutter. Local
regulations may restrict the age of the operator.

Never cut a hedge while people, especially

children or pets, are nearby.

The operator or user is responsible for accidents

or hazards occurring to other people or their
property.

Do not operate the hedgecutter when barefoot or

wearing open sandals, always wear substantial
footwear and long trousers. The use of sturdy
gloves, non-skid footwear and safety glasses is
recommended. Do not wear loose clothing or
jewellery which can be caught in moving parts.

Thoroughly inspect the area where the

hedgecutter is to be used and remove all wires and
other foreign objects.

Prior to operation, check cutter blades, blade

bolts and cutter assembly for wear or damage. Do
not operate with a damaged or excessively worn
cutting device.

Check cable for damage before starting work and

replace if necessary. Keep cable away from heat, oil
and sharp edges.

Know how to stop the hedgecutter quickly in an

emergency.

Cut a hedge only in daylight or in good artificial

light.

Never operate the hedgecutter with defective

guards or without the guard in place.

Always ensure all handles and guards supplied

are fitted when using the hedgecutter. Never
attempt to use an incomplete hedgecutter or one
with an unauthorised modification.

Never hold the hedgecutter by the guard.

While operating the hedgecutter always be sure

of a safe and secure operating position at all times,
especially when using steps or a ladder.

Always be aware of your surroundings and stay

alert for possible hazards that you may not hear
whilst operating the hedgecutter.

Remove the plug from the socket:
– before checking, clearing a blockage or working
on the hedgecutter.
– after striking a foreign object, inspect the
hedgecutter for damage and make repairs as
necessary.
– if the hedgecutter starts to vibrate abnormally
check immediately.

Keep all nuts, bolts and screws tight to ensure

that the hedgecutter is always in a safe working
condition.

The hedgecutter should be stored in a dry, high or

locked up place out of the reach of children.

Replace worn or damaged parts for safety.

Do not attempt to repair the machine unless you

are qualified to do so.

Electrical Safety

Warning! Switch off, remove plug from mains

before adjusting, cleaning or if cable is cut,
damaged or entangled.

The blades continue to move for a few

seconds after the hedgecutter is switched off.
Caution! Do not touch the moving blades.
Your machine is double insulated for safety and
requires no earth connection. The operating voltage
is 230 V AC, 50 Hz (for non-EU countries 220 V,
240 V as applicable).
Extension cords/leads should only be used if they
comply with H05VV-F or H05RN-F types.
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.

WARNING: For your safety, it is required that the
plug attached to the machine is connected with the
extension cord.
The coupling of the extension cord must be
protected against splash water, be made of rubber
or coated with rubber. The extension cord must be
used with a cable strain relief.
The connection lead must be inspected for signs of
damage at regular intervals and may only be used if
in perfect condition.