9
ENGLISH
SHT 217
INSTALLATION INSTRUCTION
Warning: Do not use the device outside!
Sensor installation
The sensor reacts to water contact at the two metal contacts.
The mounting position of the sensor defines when the pump should be activated by the
device SHT 217 (figure 1).
Sensor
sump shaft
pump
SHT 217
Follow-up time
100 - 0 s
(figure 2)
(figure 1)
APPROPRIATE USE
The water detector SHT 217 (pump control) is a device for detecting water level changes
and for monitoring sump shafts. When the sensor gets in contact with water, an audible and/
or visual alarm signal is raised and a pump connected is activated. The follow-up time of the
pump can be adjusted to a value between 0 and 100 seconds using the thumb wheel. The
device may only be used as previously described.
